Filter
Top Products
35
Available operations
3 Press E.
The camera returns to standby mode.
4 Press 1.
The built-in flash is popped up.
t Memo
• The flash modes that can be selected vary depending on the
capture mode.
1 Press D in standby mode.
2 Select a drive mode.
R Compensates the flash exposure.
Selects the amount of flash discharge (when
[Manual Flash Discharge] is selected).
M Resets the compensation value to the
default setting.
Setting the Drive Mode
Single Frame Shooting
(L)
Normal capture mode
Continuous Shooting
(Z/b)
Continuously takes pictures
while 0 is kept pressed.
Self-timer
(O/P/Y)
Releases the shutter about 12
seconds or 2 seconds after
0 is pressed.
Remote Control
(Q/R/S)
Enables shooting with remote
control.
Bracketing
(T/1/U)
Takes three consecutive pictures
at different exposure levels.
Multi-exposure
(V/z/W/X)
Creates a composite image by
taking multiple pictures and
merging them into a single
image.
Interval Shooting
(q/r/s)
Automatically takes pictures at a
set interval from a set time.
Interval Composite
(t/u/v)
Takes pictures at a set interval
from a set time and merges them
into a single image.
Single Frame Shooting
Single Frame Shooting
Cancel
Cancel
OK
OK