Filter
Top Products
45
1
Getting Started
If you accidentally select the wrong language and go to the next procedure, perform
the following operation to set the language back.
When the Wrong Language Has Been Inadvertently Selected
1
Press the four-way controller (5).
2
Use the four-way controller (2345) to select the desired
language and press the 4 button.
The [Initial Setting] screen appears in the selected language.
When the Screen After Step 2 Appears in the Wrong Language
1
Press the 3 button.
This exits the setting screen and returns the camera to capture mode.
2
Press the 3 button.
The [A Rec. Mode] menu appears.
3
Press the four-way controller (5) twice.
4
Use the four-way controller (32) to select [Language/ ].
5
Press the four-way controller (5).
The [Language/ ] screen appears.
6
Use the four-way controller (2345) to select the desired
language.
7
Press the 4 button.
The [W Setting] menu appears in the selected language.
The language is now switched to your desired language. To reset [Hometown], [Date]
and [Time], refer to the pages below for instructions.
• To change the Hometown city, follow the steps in “Setting the World Time”
(1p.173).
• To change the date and time, follow the steps in “Changing the Date and Time”
(1p.170).
The video output format (NTSC/PAL) is set to the format of the city selected in
[Hometown] on the [Initial Setting] screen. See the following pages for information on
the available video output formats and how to change the output format.
• Video output formats available initially: “List of World Time Cities” (1p.220)
• To change the video output format: “Changing the Video Output Format” (1p.180).