Filter
Top Products
This chapter walks you through the installation and setup process for your Philips PCA635VC unit. Some of the diagrams
in this section may look different than your system. This user’s guide is designed to be used along with any existing docu-
mentation that you have collected for your computer.
The following diagram is an overview of all the wiring connections for Philips PCA635VC.
Connect the camera, the microphone and the adapter
1 Switch off the computer.
2 Connect the connector at the end of the camera cable to the parallel port of the computer.
3 Protruding from the connector which is now connected to the parallel port are two short cables with small connectors,
One of these two connectors fits into the line in of the sound card. Take hold of the small connector and push it firm-
ly and fully into the line in of the sound card.
4 Connect the remaining small connector into the connector of the adapter cable.
Directing the camera
5 The position of the camera and the amount of light available have a great effect on the quality of the video images.
Preferably position the camera at eye level and less than a metre away from what you want to record. Ensure that as
much light as possible is falling on the object you want to record.
Setup & Installation
9
2
Drawings
not to scale
Camera
Adapter
Parallel port
Parallel connec-
tor
Sound card
Line In
Adapter connector
to camera
connector...
...to
adapter