Filter
Top Products
26
27
• OSD DISPLAY
OSD DISPLAY SETUP
CAMERA TITLE : DOMEID
VIEW DIRECTION : OFF
DOME OSD DISPLAY : ON
AREA DISPLAY : OFF
SAVE AND EXIT (ESC TO CANCEL)
CAMERA TITLE : 8 CHARACTER CAN BE SET
VIEW DIRECTION : ON / OFF
DOME OSD DISPLAY : ON / OFF
AREA DISPLAY : ON / OFF
• VIEW DIRECTION
„ON” sets current direction as N(North) and the coordinate angle to 000. „OFF” hides the directional title. Every 90 degrees of clockwise rotation will change
the title to E(East), S(South), W(West). If using the ON/OFF option frequently, it is recommended that you set „North” as a Preset. Recall the „North” Preset
before enabling the directional title.
• DOME OSD DISPLAY
All display or title will disappear when DOME OSD DISPLAY sets OFF
• AREA DISPLAY
If this option is enabled, the nearest area title will be displayed when the camera is moving whether by manual operation, Auto Scan, or Pattern. Select ON or
OFF by pushing the Joystick to the right or to the left. The Dome camera’s OSD option will override this function (Dome camera’s OSD must be enabled).
• VIEW ANGLE SETUP
VIEW ANGLE SETUP
PANNING RANGE
FLIP : ON
TILT OVER ANGLE : W/O BUBBLE
SAVE AND EXIT (ESC TO CANCEL)
FLIP: ON / OFF
TILT OVER ANGLE: w/o bubble, with bubble, ON