6
Video-in Jack
You can install an analog camera and connect it to video-in jack.
12V DC-Out Jack
The output power is 12V DC. This is used to supply 12V DC power to one external
camera. The output power is 12V DC, 400mA maximum. The output power still
supplies12VDC,400mApowertooneexternal,whentheIVS-110obtainspower
from PoE switch.
DI/DO/RS-485 Connector
ThisIVS-110providesageneralI/Oterminalblockwithonedigitalinputandone
output for device control. It has 6 Pins that from left to right that are 12V DC
power supply (50mA maximum), Alarm Input, GND, Alarm Output, D+ terminal of
RS-485 and D- terminal of RS-485.
Note
The RS-485 of IVS-110 is master that can control external scanner
or PT camera.
2.2.2 Back Panel
Audio-in Jack
Audio-in (line level) jack allows any device that could input audio.
Reset Button
Thisbuttonishiddeninthepinhole.PleaserefertotheAppendixAinmanualfor
more information.
Status LED
TheStatusLEDwillturngreenwhilesystemisbootingupsuccessfully.ThisLED
isalsousedtoindicatethestatusofnetworkconnection.TheLEDwillashgreen
while some on access the IVS-110.
Audio-Out Jack
Audio-out Jack allows this device to output audio or alerting sound.