Filter
Top Products
21
Appendix B -- Mounting the Detector
The following procedures are recommended for mounting detectors and their associated adapters to the LS 785.
Refer to the photographs for additional information.
1. Determine the detector to be attached to the LS 785.
2. Locate the correct adapter flange or adapter flange assembly for the detector to be attached to the LS 785.
3. If the correct adapter is not attached to the LS 785, refer to the photograph of the adapter attached and
remove it.
4. If the adapter flange to be installed is for a PIXIS, the four #8-32 socket head screws and washers used to
secure the other adapters must be re-installed into the instrument housing to prevent light leaks!