Filter
Top Products
Using the Adapter/Charger to Power Your Camcorder
The adapter/charger attaches to the camcorder and lets you power your camcorder
directly from standard household power. The adapter/charger operates on 100-240
volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the
camcorder or recharge the battery.
To AC 100-240V, 50/60 Hz
POWER
Indicator
DC OUT
Jack
DC Cable
Attach Adapter/Charger
1. Connect one end of the DC cable to
the DC OUT jack on the adapter/
charger.
2. Connect the other end of the DC cable
to the DC in jack on the camcorder as
shown above.
3. Plug the adapter/charger's plug into
the nearest AC outlet (100-240V,
50/60Hz).
4. If the adapter/chargeris properly
connected, its POWER indicator
will light.
ICA_UTION:Do notusethis adapter/
_h_r_fo_anyotherp_rpos_other
_ _g th_va_260orFm
: batte_ p_6korsupplyingpow_ to_e
camc6rder. ".......
Remove Adapter/Charger
1. Unplug the adapter/chargerfrom the
wall outlet.
2. Remove the DC cable from the
adapter/charger and camcorder.
Using an Optional Plug Adapter
An optional plug adapter may be required
in some countries.
J
OptionalAC AC 100-240V
Plug Adapter
1. Hag the adapter/charger's plug into
the AC plug adapter.
2. Plag the AC plug adapter into the AC
outlet.
12