Filter
Top Products
Playback Features (Continued)
CO UN TER
R/M Button
Button
Switch
REW
Button
Switch in
VCR
Time Counter
The time-counter display shows the actual time elapsed when playing back a
segment of tape. The memory-stop feature helps locate a certain point on the
tape. When memory stop is on, the tape will stop automatically during rewind
or fast forward when the time counter reaches M 0:00:00.
To Use the Memory-Stop Feature
1. Locate the place on the tape you want 2.
to return to, place the POWER switch
in VCR, and press COUNTER R/M for
more than two seconds to reset the
counter to 0.'00.'00.
M 0:00:00
Press COUNTER R/M for less than
one second to turn the time counter's
memory-stop feature on or off.
When memory stop is on, an M
appears before the time counter in
the viewfinder.
3. Continue to play the tape. When you
want to return to the place you
marked, press the STOP button.
4. Press REW. The tape will rewind to
the time counter reading of
M 0:00:00.
Time Counter With Memory
Stop Turned On
60