Filter
Top Products
Inserting and Removing Cassettes
PUSH Here to
Close Cassette
Compartment
EJECT Button
Tape
Window
Tape
Wheel
_'_ufi6n:O ..... ,-
'_f_inghp_nd i_
the tape.win-_':
dow facing out.
Tab -,_uld glide _',_
t_e_ilytinttYthe ,._
compartment.
-.-Donot force
i e cassette.
Before inserting a cassette, turn the tape
wheel on the side of the cassette in the
direction shown to remove any slack in
the tape.
.
3.
Attach a power supply. Then slide
and'.release EJECT to open the
cassette compartment.
Insert or remove the cassette.
Close the cassette compartment door
by pressing on the area labeled PUSH
until it locks into place.
-Z_:.:::..-:<%<<--::- o';:*o'_":_-: :4," :.t-t.- :"U.: -ti<-',; " ::. :,: -1:.:" ,tb.
Cassette Care and Storage _ ...... _ .......... _, ....... _-_ ...............
• When you are finished with a cassette,
rewind it, remove it from the
camcorder, and label it.
• Store cassettes vertically in their
protective cases at normal room
temperatures. Do not leave your
camcorder or cassettes in a car or
outdoors for an extended period.
Excessive heat or cold may damage
your cassettes.
• Keep the cassette away from strong
magnetic fields such as electric motors
and other devices.
18
• Keep dust from entering the cassette
compartment. All dust is abrasive and
will cause excessive wear on the tape
and the camcorder's recording or
playback heads.
• Do not use cassettes with damaged or
spliced tape.
• Do not use a cassette if it has been
damaged or exposed to moisture. The
tape may jam and/or damage your
camcorder.