Filter
Top Products
Tape stops during
rewind or fast forward
Camcorder remains in
pause mode
Sound is too low or
distorted
Dew Indicator
flashing in viewfinder
Poor auto-focus
operation
Viewfinder displays
are out of focus
Time-counter memory may be on. Whenever an "M"
appears with the time-counter display, the camcorder
will stop rewinding (or fast forwarding) when counter
reads M 0:00:00. Press REW or FF again to continue
rewinding or fast forwarding, or press COUNTER R/M
to turn off the memory-stop feature.
Press PLAY/PA USE to return to normal playback.
Subject was too far from camcorder.
If the dew indicator ( I'i] ) flashes in the viewfinder,
there is moisture in the camcorder. Wait until this
indicator no longer appears before operating the
camcorder.
• Subject is dark or behind glass. Auto-focus may not
work under these conditions. Place AE dial in MAN
and focus manually. See pages 32-33.
• Subject is not in center of viewfinder or two subjects
are at different distances. Place AE dial in MAN and
focus manually. See pages 32-33.
• Lens is smudged, and image appears unfocused.
Lens is smudged, and image appears unfocused.
Eyepiece focus control is misadjusted.
Model CC643: The small controls on the bottom of
the viewfinder control the brightness and white
balance (blue tint) of the viewfinder. These controls
have been set at the factory and should require no
adjustment. If the controls ever do require adjustment,
carefully use a plastic screwdriver. Make the
adjustments with caution to prevent damaging the
miniature controls.
73