Filter
Top Products
Detailed Recording Steps
28
1 Attach a power source to the
camcorder.
Detailed Instructions for attaching the
adapter/charger, battery, or optional
DC car cords are on pages 20-25.
2 Prepare the camcorder to record.
A. Press and hold the small button on
the POWER switch while sliding it
to the CAMERA position.
B. Insert a cassette.
1. Slide and release the EJECT
button to open the cassette door.
2. Insert a cassette as shown on
page 27. Insert the cassette only
one way with the record-protect
tab facing up and the tape
window facing out.
3. Gently close the cassette door
with your hand. The camcorder
will automatically close the top
of the cassette compartment. Do
not push the top down or you
may damage your camcorder.
C. Place the FULL AUTO OFF/ON
switch in the ON position.
D. Remove the lens cap and attach it to
the lens cap holder on the hand
strap.
FADE
RESET
DISPLAY
POWER
TITLE SEL
EDIT–ADV
REW
PLAY
F.FWD
STOP
PAUSE
OFF
VCR
CAMERA
EJECT
+
—
W
T
BATTERY
FULL AUTO
SHUTTER
DATE
TITLER
FOCUS
OFF ON
2B
3C
4B
2C
5A
2A
4A
4A
REVIEW
5A
For Model
Pro867 Only
For Model
Pro870 Only
For Model Pro870 Only
Use the following steps to
make a recording using the
automatic control settings.
Detailed use of the controls is
described on the following
pages.
POWER SAVE
.
.
ON
W
T
BATTERY
PAUSE
STOP
REW PLAY F.FWD
POWER
2E
5B
1
3B
2D
3A
REVIEW
(continued on next page)