Filter
Top Products
No power
Won’t record or
playback
Won’t playback
Won’t record
No picture in
viewfinder
Trouble Checks
64
Troubles sometimes are caused by
simple “faults” that you can easily
correct without the help of a service
technician by first checking a few basic
remedies.
Before you call or take your camcorder
to an Authorized RCA Compact
Camcorder Servicenter, look below for
the type of trouble you are
experiencing. Then perform the simple
checks and adjustments listed for that
trouble.
If service should be necessary, the
warranty information lists what your
warranty covers and explains how to
get service.
• ON/POWERSAVE lever in POWERSAVE position. Place
lever in ON position.
• If using battery, it may need to be recharged.
• If using AC adapter/charger, make sure it is plugged into a
working outlet.
• If using AC adapter/charger, make sure it is plugged into a
working outlet.
• If DEW indicator flashes in the viewfinder, there is
moisture in the camcorder. Leave power on, and wait until
the DEW indicator no longer appears.
• ON/POWERSAVE lever in POWERSAVE position. Place
lever in ON position.
• There may be no cassette in the camcorder.
• Try ejecting and re-inserting cassette.
• The cassette tape may be broken, try another cassette.
• You may have reached the end of the cassette, try
rewinding it.
• POWER switch must be in VCR position.
• Record-protect tab has been closed. (See page 26.)
• POWER switch must be in CAMERA position.
• ON/POWERSAVE lever must be in ON position.
• Remove lens cap.
• ON/POWERSAVE lever must be in ON position when
POWER switch is in CAMERA position.
Trouble Checks and Adjustments