Ricoh 06424 Digital Camera User Manual


 
6
105
Appendix
When the camera has not been used for a long time, confirm that it is still
working properly, particularly prior to taking important pictures (such as
at a wedding or when traveling). Contents of the recording cannot be
guaranteed if recording, playback or transferring your data to a
computer, etc. is not possible due to a malfunction of your camera or
recording media (memory cards), etc.
To keep the battery in optimum condition, avoid storing it in a fully
charged state or in high temperatures.
If the battery is left inserted and the camera is not used for a long time,
the battery will over-discharge and shorten the battery’s life.
Charging the battery a day before use or on the day of use is
recommended.
The AC plug cord provided with this camera is developed exclusively for
the battery charger D-BC109. Do not use it with other devices.
Do not subject the camera to high temperatures or high humidity. Do not
leave the camera in a vehicle, as the temperature can get very high.
Do not subject the camera to strong vibrations, shocks, or pressure. Use
a cushion to protect the camera from vibrations of motorcycles,
automobiles, or ships.
The temperature range for camera use is 0°C to 40°C (32°F to 104°F).
The monitor may appear black at high temperatures, but will return to
normal at normal temperatures.
The monitor may respond more slowly at low temperatures. This is due
to liquid crystal properties, and is not a malfunction.
Sudden temperature changes will cause condensation on the inside and
outside of the camera. Place the camera in your bag or a plastic bag,
and remove it after temperatures of the camera and surroundings are
equalized.
Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salt.
These could cause the camera to breakdown. Wipe the camera to dry
off any rain or water drops.
Do not press on the monitor with excessive force. This could cause it to
break or malfunction.
Be careful not to overtighten the screw in the tripod socket when using
a tripod.
Do not clean the camera with organic solvents such as thinner, alcohol,
and benzine.
Use a lens brush to remove dust accumulated on the lens. Never use a
spray blower for cleaning as it may damage the lens.
Please contact your nearest service center for professional cleaning of
the CMOS sensor. (This will involve a fee.)
Periodic inspections are recommended every one to two years to
maintain high performance.
Do not store the camera with preservatives or chemicals. Storage in high
temperatures and high humidity can cause mold to grow on the camera.
Remove the camera from its case and store it in a dry and well-ventilated
place.
Avoid using or storing the camera where it may be exposed to static
electricity or electrical interference.
Avoid using or storing the camera in direct sunlight or in locations where
it may be exposed to rapid changes in temperature or to condensation.
Care to be Taken During Handling
Before Using Your Camera
About the Battery and Charger
Precautions on Carrying and Using Your Camera
Cleaning Your Camera
Storing Your Camera