Ricoh 06424 Digital Camera User Manual


 
4
66
Playback
Connect the camera to a computer using an USB cable.
Make sure to have a commercially available USB cable
equipped with a micro B terminal.
1 Turn the computer on.
2 Turn the camera off.
3 Open the terminal cover of
the camera, and connect
the USB cable to the USB
terminal.
4 Connect the USB cable to the USB port of the
computer.
5 Turn the camera on.
The camera is recognized as a removable disk.
The grip lamps of the camera blink slowly while the camera
is connected with the computer via USB cable.
6 Save the captured images to the computer.
7 Disconnect the camera from the computer.
u Caution
The camera cannot be operated while it is connected to a
computer. To operate the camera, terminate the USB
connection on the computer, then turn off the camera and
remove the USB cable.
If the “PENTAX K-S1” dialog appears on the computer screen
in Step 5, select [Open folder to view files] and click the OK
button.
t Memo
Refer to “Operating Environment for USB Connection and
Provided Software” (p.98) for system requirements to
connect the camera to a computer and to use the software.
The USB connection mode when connecting the camera to a
computer can be set in [USB Connection] of the D2 menu.
Normally, you do not need to change the default setting
([MSC]).
Connecting the Camera to a
Computer