Filter
Top Products
2
29
Getting Started
2 Face the A mark on the
battery towards the lens,
and insert the battery until
it locks into place.
To remove the battery, push the
battery lock lever in the direction
of 2.
3 Close the battery/memory
card cover.
t Memo
• The battery level may not be displayed properly if the camera
is used at low temperatures or when performing Continuous
Shooting for a long time.
• Battery performance temporarily decreases as the
temperature decreases. When using the camera in cold
climates, have extra batteries at hand and keep them warm in
your pocket. Battery performance will return to normal at
room temperature.
• Have extra batteries ready when traveling overseas, or taking
a lot of pictures.
We recommend the use of the optional AC adapter kit K-AC128
when using the monitor for a long time or when connecting the
camera to a computer or AV device.
1 Make sure that the camera is turned off.
2 Open the battery/memory card cover.
Remove the battery if it is inserted in the camera.
3 Pull out the connection
cable cover (1) on the
right side of the battery/
memory card cover.
4 Insert the DC coupler into
the battery chamber.
5 Close the battery/memory
card cover.
Make sure that the connection
cable comes out from the
connection cable cover section.
2
Using the AC Adapter
1