Filter
Top Products
6
92
Appendix
Not enough battery power
remaining to activate Pixel
Mapping
These messages appear when you try to
perform Pixel Mapping or Sensor
Cleaning, or to update the firmware if the
battery level is insufficient. Install a fully
charged battery.
Not enough battery power
remaining to clean sensor
Not enough battery power
remaining to update the
firmware
Unable to update firmware.
There is a problem with the
firmware update file
Unable to update the firmware. The
update file is damaged. Try downloading
the update file again.
Image folder cannot be
created
The maximum folder number (999) is
being used, and no more images can be
saved. Insert a new memory card or
format the card.
Unable to store image
The image could not be saved because of
a memory card error.
The operation could not be
completed correctly
The camera was unable to adjust the
manual white balance. Try the operation
again.
Failed to authenticate the wireless
function when using the Flucard. Or,
[Reset Transfer Settings] failed when
using an Eye-Fi card or Flucard.
No more images can be
selected
You are trying to select more than the
maximum number of images for the
following functions.
• Select & Delete
• RAW Development
•Protect
• Eye-Fi Image Transfer
No image can be processed
There are no images that can be
processed using the Digital Filter or RAW
Development function.
Error Messages Description
This image cannot be
processed
Appears when you try to perform Resize,
Cropping, Digital Filter, Movie Edit, RAW
Development, or Save as Manual WB for
images captured with other cameras, or
when you try to perform Resize or
Cropping for minimum file size images.
This function is not available
in the current mode
You are trying to set a function that is not
available for the capture mode that is set.
The camera will turn off to
prevent damage from
overheating
The camera will turn off because its
internal temperature is too high. Leave
the camera turned off until it has had time
to cool down before turning on the
camera again.
Set the Eye-Fi
communication to “SELECT”
Images cannot be transferred when
[Action Mode] is not set to [SELECT] in
[Wireless Memory Card] of the D3 menu.
(p.81)
Image not found
There are no images that can be
transferred when an Eye-Fi card is used.
No wireless memory card
inserted
You are trying to perform [Eye-Fi Image
Transfer] with no Eye-Fi card inserted.
Cannot be selected
This folder cannot be selected because
the number of files stored in this folder
exceeds the maximum number allowed.
Error Messages Description