Ricoh 06424 Digital Camera User Manual


 
3
46
Shooting
1 Press C in standby mode.
2 Select a flash mode.
3 To compensate the flash
output or when K is
selected, press B and
then use V to adjust the
value.
Press M to reset to the default
setting.
4 Press E.
The camera returns to standby mode.
5 Press 1.
The built-in flash is popped up.
t Memo
The flash modes that can be selected vary depending on the
capture mode.
*1 The flash is not available in some scene modes. (p.82)
You cannot take pictures while the flash is being charged. If
you want to take pictures while charging the flash, set [20
Release While Charging] in the E3 menu.
Depending on the lens being used, the use of the built-in flash
may be limited. (p.85)
Using the Built-in Flash
Y
A
Auto Flash
Discharge
Automatically measures the ambient light and
determines whether to use the flash.
B
Auto Flash
+Red-eye
Reduction
Discharges a pre-flash for red-eye reduction
before an automatic flash.
C
Flash On Discharges a flash for each picture.
D
Flash On
+Red-eye
Reduction
Discharges a pre-flash for red-eye reduction
before the main flash and discharges a flash
for each picture.
E
Slow-speed
Sync
Sets to a slow shutter speed.
Use this, for example, when shooting a portrait
with the sunset in the background.
F
Slow-speed
Sync+Red-
eye
Discharges a pre-flash for red-eye reduction
before the main flash is discharged with Slow-
speed Sync.
H
G
Trailing
Curtain
Sync
Discharges a flash immediately before closing
the shutter.
Sets to a slow shutter speed.
Captures moving objects as if they are leaving
a light trail behind them.
K
Manual
Flash
Discharge
Sets the amount of flash discharge between
FULL and 1/128 power.
0.0
0.0
Auto Flash Discharge
Auto Flash Discharge
Cancel
Cancel
OK
OK
Capture Mode Selectable Flash Mode
R, S
*1
A, B, C, D
W, G, H, J C, D, E, F, H, K
I, K, L, M
C, D, G, K
+1.0+1.0
0.00.0
Auto Flash DischargeAuto Flash Discharge
CancelCancel
OKOK