Filter
Top Products
3
48
Shooting
1 Press G in standby mode.
2 Select [AF Mode] and press E.
The [AF Mode] screen appears.
3 Select an autofocus mode
and press E.
The control panel reappears.
4 Press F.
The camera returns to standby mode.
t Memo
• The following settings for autofocus operation can be set in
the E3 menu.
• In [18 Hold AF Status], you can set whether to immediately
reactivate autofocus or to maintain the focus for a certain
amount of time before activating autofocus when the subject
happens to move out of the selected focusing area after being
focused. The default setting is to immediately activate
autofocus when focusing is unsuccessful.
•In S mode, [AF Mode] is fixed to x or y depending
on the set scene. (p.82)
•In R mode, [AF Mode] is fixed to z.
Setting the AF Mode when
Shooting with the Viewfinder
v/A1
z
Auto-select
mode
Switches automatically between x and
y modes according to the subject.
x
Single
mode
When 0 is pressed halfway and the
subject comes into focus, the focus is locked
at that position.
The AF assist light turns on as necessary.
y
Continuous
mode
The subject is kept in focus by continuous
adjustment while 0 is pressed
halfway.
P appears in the viewfinder when the
subject comes into focus.
The shutter can be released even if the
subject is not in focus.
AF ModeAF Mode
CancelCancel
OKOK
15 AF.S Setting Focus-priority, Release-priority
16 1st Frame
Action in AF.C
Release-priority, Auto, Focus-priority
17 Action in AF.C
Continuous
Focus-priority, Auto, FPS-priority
18 Hold AF Status Off, Low, Medium, High