Filter
Top Products
3
51
Shooting
4 Press F.
The camera returns to standby mode.
If you selected E or 8 in Step 3, proceed to Step 5.
5 Select the desired AF point.
Available operations
t Memo
• When the AF point can be changed, the E lamp turns off.
• To change the AF point from the menu, set in [AF Active Area]
of [AF Settings] in the A1 menu.
• You can also set the camera so that switching to the Change
AF Point mode by pressing and holding E can be operated
with M. (p.77)
1 Press G in standby mode in Live View.
2 Select [Contrast AF] and press E.
The [Contrast AF] screen appears.
3 Select an autofocus mode
and press E.
ABCD
Changes the AF point.
E
Returns the AF point to the
center.
Press and hold E Switches the function of the
arrow keys (ABCD) to that
for Change AF Point or the
direct key operation.
1/
1/
250
250
800
800
F
F
5.6
5.6
99999
99999
Setting the AF Mode during
Live View
v/A3
e
Face
Detection
Detects and tracks faces of people.
The main face detection frame for AF
and AE is displayed in yellow.
j
Face
Detection
Assist
Used when facing the camera toward
yourself and taking a picture.
f
Tracking
Tracks the subject in focus.
The shutter can be released even if the
subject is not in focus.
g
Multiple
AF Points
Sets the focusing area to the desired
area.
The sensor is divided into 35 areas
(7 horizontal by 5 vertical), and you can
select a wider or narrower focusing area
by using 35, 25, 15, 9, or just 1 of those
35 areas available.
Contrast AF
Contrast AF
Face Detection
Face Detection
Cancel
Cancel
OK
OK
e_kb558_om.book Page 51 Tuesday, September 16, 2014 11:59 AM