Ricoh 06581 Digital Camera User Manual


 
4
69
Playback
u Caution
While the camera is connected to an AV device, nothing is
displayed on the camera monitor. Also, you cannot adjust the
volume on the camera. Adjust the volume on the AV device.
t Memo
Check the operating manual of the AV device and select
a suitable input terminal for connecting the camera.
If you intend to use the camera continuously for a long period,
use of the optional AC adapter kit is recommended.
By default, the maximum resolution supported by both the AV
device and camera is automatically selected. If it fails to play
back images properly, change the setting in [HDMI Out] of the
D2 menu.
Connect the camera to a computer using an USB cable.
Make sure to have a commercially available USB cable
equipped with a micro B terminal.
1 Turn the computer on.
2 Turn the camera off.
3 Open the terminal cover
of the camera, and connect
the USB cable to the USB
terminal.
4 Connect the USB cable to the USB port
of the computer.
5 Turn the camera on.
The camera is recognized as a removable disk.
The grip lamps of the camera blink slowly while the camera
is connected with the computer via USB cable.
6 Save the captured images to the computer.
7 Disconnect the camera from the computer.
Connecting the Camera
to a Computer
e_kb558_om.book Page 69 Tuesday, September 16, 2014 11:59 AM