Filter
Top Products
3
Shooting
47
You can set the position and range of the autofocusing area
(AF area).
1 Set [AF Mode] to g or h.
2 Press c.
3 Select the AF area.
Use the frame that appears
on the monitor to change the
position and size of the AF area.
Available operations
4 Press E.
The AF area is set.
t Memo
• When [Focus Peaking] is set to [ON] in [Live View] of the A3
menu, the outline of the subject in focus is emphasized and
makes it easier to check the focus. This function works in both
v and w modes.
You can precisely fine tune your lenses with the camera’s
autofocus system.
1 Select [26. AF Fine Adjustment] in E4 menu
and press D.
The [26. AF Fine Adjustment] screen appears.
2 Select [Apply All] or [Apply One] and press E.
3 Select [Setting] and adjust
the value.
Available operations
4 Press E.
The adjustment value is saved.
5 Press F twice.
The camera returns to standby mode.
t Memo
• Check focus accuracy by magnifying the image during Live
View (p.35) or Digital Preview (p.48).
Selecting the Desired Focusing Area
ABCD
Changes the position of the AF area.
R
Increases/reduces the size of the AF area
(when g is selected).
M
Returns the AF area to the center.
OK
OK
AF Fine Adjustment
E4
Apply All
Applies the same adjustment value to all
lenses.
Apply One
Saves an adjustment value for the lens being
used. (Up to 20 values)
D/R to the right Adjusts the focus to a closer
position.
C/R to the left Adjusts the focus to a farther
position.
M
Resets the adjustment value
to the default setting.
AF Fine Adjustment
AF Fine Adjustment
26.
26.
Apply All
Apply All
2
2
Setting
Setting
±
0
±
0
±
0
±
0
Cancel
Cancel
OK
OK
e_kb502_om.book Page 47 Monday, October 14, 2013 4:14 PM