Filter
Top Products
3
Shooting
57
3 Press G.
The parameter setting screen appears.
4 Set the parameters.
Available operations
5 Press E.
The screen of Step 2 reappears.
6 Press E.
The camera returns to standby mode.
The outcome of Cross Processing varies each time a picture
is taken. If you take a cross processed image that you like,
you can save the Cross Processing settings used in that image
so that you can repeatedly use the same settings.
1 Press B in single image display of playback mode.
The playback mode palette appears.
2 Select a and press E.
The camera will search for cross processed images starting
from the most recent image taken.
[No cross processed image] appears if there are no cross
processed images.
3 Use Q to select a cross
processed image.
4 Select a number and press E.
The settings of the selected image are saved to Favorite 1
to 3.
t Memo
• The saved Cross Processing settings can be loaded by
selecting [Cross Processing] in Step 2 of “Custom Image”
(p.56), and selecting [Favorite 1 - 3] for the parameter.
AB
Selects a parameter.
CD
Adjusts the value.
Q
Switches between [Contrast],
[Contrast Highlight Adjustment]
and [Contrast Shadow Adjustment].
R
Switches between [Sharpness],
[Fine Sharpness] and [Extra Sharpness].
(Not available in C mode).
M
Resets the adjustment value to the default
setting.
Saturation
Saturation
Cancel
Cancel
OK
OK
Check
Check
Saving the Cross Processing Settings
of a Captured Image
Save as Favorite 1
Save as Favorite 1
Saves this image's Cross
Saves this image's Cross
Processing settings
Processing settings
100-0001
100-0001
Save as Favorite 2
Save as Favorite 2
Save as Favorite 3
Save as Favorite 3
OK
OK
Cancel
Cancel
e_kb502_om.book Page 57 Monday, October 14, 2013 4:14 PM