Filter
Top Products
165
6
Downloading Images to Your Computer
If images are downloaded using RICOH Gate La or the [Scanner
and Camera Wizard], turn the camera off after downloading images
and disconnect the USB cable.
Perform the following operations when disconnecting the camera
from your computer. (The display is an example of Windows XP.
The terms are different for other operating systems but the
operations are the same.)
1
Double-click the [Safely Remove
Hardware] icon at the right end of
the task bar.
2
Select [USB Mass Storage Device] and click [Stop].
3
Check that [USB Mass Storage Device] is selected and
click [OK].
4
Click [Close].
5
Disconnect the USB cable.
Note ----------------------------------------------------------------------------------------------
• If the USB cable is disconnected without disabling the connection, the Unsafe
Removal of Device screen may be displayed.
• Be sure to stop the connection before removing the USB cable when connected in
mass storage mode.
• Files will not be properly transferred if the USB cable is removed while transferring
images from an SD memory card inserted in the camera to your computer before
stopping the connection.
Disconnecting the Camera from Your Computer