Filter
Top Products
EN - 16
Caution
When using bounce ash, the illumination coverage is xed at
50 mm.
When the ceiling or walls are too far, the reected light of the
ash may not be enough and the bounce ash may not be
eective.
If the ceiling or walls are not white, the reected light may be
aected, taking their color.
If the reected light is attenuated too much and the bounce
ash is not eective enough, select a higher ISO setting on
the camera.
Catch-li ght panel
When using bounce ash, you can also use the catch-light panel
at short distance to direct some of the light at a human subject,
adding a glint in their eyes and brightening their expression.
When you pull out the wide panel,
the catch-light panel will be pulled
out at the same time. Push the wide
panel back inside.
When using the catch-light panel, set
the ash head upwards at a 90˚ and
use bounce ash.
•
•
Flash compensation
When using Type R cameras, you can compensate the ash
output level using the TTL auto or Ambient light auto mode. For
details, see the Camera User Guide.
1st curtain / 2nd curtain synchronization
For details, see the Camera User Guide.
•
•
•