Filter
Top Products
EN - 8
Mounting the ash on a camera
1 Turn the lock ring as shown
in the illustration to loosen
it.
2 Insert the ash unit into the
hot shoe on the camera.
Securely insert the ash unit
all the way into the hot shoe.
3 Turn the lock ring as shown
in the illustration to x the
ash unit to the camera.
Removing the ash from a camera
1 Loosen the lock ring completely before removing the ash
unit.
Turning on the ash
1 Press the ON/OFF button
to turn on the ash. When
the power is turned on,
the PILOT lamp lights up in
red and the ash starts to
charge.
2 After a few seconds, when
the PILOT lamp turns green,
the ash is completely
charged and ready to be
used.