Filter
Top Products
i
LIMITED WARRANTY — Roper Scientific Analytical Instrumentation
Roper Scientific, Inc. makes the following limited warranties. These limited warranties extend to the original
purchaser only and no other purchaser or transferee.
Limited One (1) Year Warranty
Roper Scientific warrants this product against defects in materials or workmanship for a period 1 year after
the date of original invoice. During this period, Roper Scientific will repair a defective product or part,
without charge to you. You must deliver the entire product to the Roper Scientific factory or, at our option, a
factory authorized service center. You are responsible for all transportation and insurance charges to return
the product to the service center, and Roper Scientific will be responsible for all transportation charges and
insurance to return the product to you. International customers should contact your local manufacturer's
representative/distributor for repair information and assistance or visit our technical support page at
www.roperscientific.com.
Shutter Warranty
Roper Scientific warrants the standard, factory-installed shutter of all our products that incorporate an
integrated shutter for a period of twelve (12) months. This warranty applies to the standard shutter installed
in the camera system at the time of manufacture. Non-standard shutters, SPR (special product request) shutters,
and third-party shutter drive equipment carry no warranty expressed or implied. Roper Scientific will supply, at no
cost to the customer, up to one (1) replacement shutter during the warranty period. Roper Scientific will, at
Roper Scientific's option, either ship a ready-to-install shutter to the customer site for installation by the
customer according to the instructions in the product User Manual or arrange with the customer to return the
camera system (or portion of the camera system) to the factory (or factory authorized service center) for
shutter replacement by a factory-authorized agent. Responsibility for transportation and insurance charges is
described above.
Sealed Chamber Integrity Warranty
Roper Scientific warrants the sealed chamber integrity of all our products for a period of twenty-four (24)
months. Open chamber products carry no warranty to the CCD imaging device expressed or implied.
Vacuum Integrity Warranty
Roper Scientific warrants the vacuum integrity of all our products for a period of twenty-four (24) months
during which we guarantee the detector head will maintain the factory-set operating temperature without the
requirement for customer pumping.
Image Intensifier Detector Warranty
All image intensifiers by nature are susceptible to Phosphor and/or Photocathode burn (physical) damage
when exposed to high intensity light. Roper Scientific warrants, with the exception of an image intensifier that
is found to have a Phosphor and/or Photocathode burn damage (which carries no warranty expressed or
implied), all image-intensified products for a period of 1 year after the date of the original invoice. See the
Limited One (1) year warranty terms and conditions above.
X-Ray Detector Warranty
Roper Scientific warrants, with the exception of the CCD imaging device and fiber optic assembly damaged
due to x-ray (which carry no warranty expressed or implied), all x-ray products for a period of 1 year after the
date of the original invoice. See the Limited One (1) year warranty terms and conditions above.
Software Warranty
Roper Scientific warrants all Roper Scientific manufactured software discs are free from defects in materials
and workmanship under normal use for a period of one (1) year from date of original invoice. Roper Scientific
does not warrant that the function of the software will meet your requirements or that operation will be
uninterrupted or error free. You assume responsibility for selecting the software to achieve your intended
results and for the use and results obtained from the software. In addition, during the 12-month limited