Filter
Top Products
12
After each photo is shot (when the camera returns to icon mode) the numbers of photos left to
shoot at this resolution is displayed at the top left of the LCD screen.
When the camera's memory (photo capacity) is full, the LCD screen will display “0”. If you attempt
to take a photo when the memory is full the camera will beep continuously.
Digital Zoom
You can magnify your subject up to 4 times using the digital zoom. Use the
and buttons to
adjust the zoom. The
icon will flash on your LCD screen. Push the button to zoom in on your
subject. Push the
button to zoom back out.
Display
The default display setting shows icons on the LCD screen. Press the
display button once to
switch off the icons. Press the
button again to switch off the LCD (to conserve battery power).
Pressing the
display button repeatedly toggles between these display modes.
Flash
In low light conditions it is best to use the built-in flash. You can also use the flash to compensate
for backlight conditions.
To set the flash: