Filter
Top Products
13
1. Press the button. The will appear on the LCD screen. This means the flash
function has been "forced on" (manual flash). If the flash is not ready a red LED will light
up above the LCD screen and the
icon will flash repeatedly- wait until the flash is ready
before taking a photo. A low battery warning will appear on the LCD screen if there is
insufficient battery power to operate the flash.
2. Press the
button repeatedly. Select the icon shown on the LCD screen. This
will activate the automatic flash.
3. Press the button repeatedly until the icon appears. This will turn off the flash
function.
Self-Timer
You can include yourself in a photo by using this feature to delay the time between your pressing
the shutter and when the photo is actually taken. It is recommended that you use a tripod when you
use the self timer.
1. Press the
button to select the
ON
icon shown on the LCD screen.
2. Press the shutter button to start a 10 second count down (the count down will appear on
the LCD). After 10 seconds a photo is taken.
Date
If date is selected the date and time the photo was taken will be recorded on the photo.
To set the date and time please refer to the Date and Time section in Setup Mode.
Pressing the
button toggles date on and off – the date icon will appear on the LCD screen if
date is on.