Samsung 300 Digital Camera User Manual


 
60
Starting the SETUP mode
There is an option to include DATE on still images.
1. Select the SETUP mode by rotating the mode dial.
2. [SETUP 1/2] menu will be displayed.
3. Press the UP (
)/ DOWN ( ) button and select
[DATE IMPRINT].
4. Press the SET( ) button and the sub menu will be
displayed.
5. Select [ON] or [OFF] by pressing the UP ( )/
DOWN ( ) button. Press the SET( ) button to
confirm the setting.
6. The default is [ON].
SETUP 1/2
DATE IMPRINT
ON
OFF
EXIT:MENU SET:
SETUP 1/2
BEEP ON
POWER OFF 10 MIN
DATE IMPRINT ON
DATE TYPE YMD
CHANGE:
This function is not available in the movie clip mode.
Date will be imprinted as DATE TYPE setting.
The DATE IMPRINT function is unaffected by the camera being switched on and off.
The date can be set in [DATE SETUP].
Even though the [DATE IMPRINT] menu is set to [OFF] , the date will be displayed on the
LCD monitor in the RECORDING(STILL IMAGE, MOVIE CLIP) mode.
INFORMATION
Date imprint