Filter
Top Products
ŝ36Ş
OSD (On Screen Display) information
ƈ In any mode with the exception of VOICE
RECORDING mode, you can check the recording
status in the LCD monitor.
ƈ Idle mode : If you select the [LCD Save] and the
camera isn't operated during the specified
time(about 30 SEC.), the camera power
will be idle (LCD monitor : OFF, Camera status lamp : Blinking)
automatically.
- To use the camera again, press any of the camera buttons except the power
button.
- If there is no operation during the specified time, the camera power will be
turned off automatically to save battery life. Refer to page 54 for more
information about the auto power off function.
OSD INFORMATION
Full
Basic
LCD Save
Starting play mode
ƈ Turn the camera on and select Play mode by pressing the play mode button
( ). The camera can now play back the images stored in the memory.
ƈ If the memory card is inserted in the camera, all the camera functions apply only
to the memory card.
ƈ If the memory card is not inserted in the camera, all the camera functions apply
only to the internal memory.
3. Select an image that you want to view by
pressing the LEFT / RIGHT button.
ſ Press and hold the LEFT or RIGHT
button to play back the images quickly.
2. The last image stored on the memory is
displayed on the LCD monitor.
ƃ Playing back a still image
1. Select the PLAY mode by pressing the
play mode button ( ).
ƃ Manner mode : Pressing the power button for more than 3 seconds
changes the buzzer and start-up sound setting to OFF,
even though you may have set these to ON.
ƃ Lightly press the shutter button in Play mode to switch to the currently set
shooting mode.
INFORMATION