Filter
Top Products
84
PictBridge: Picture Selection
Select pictures to print
1. Connect the camera to your printer. The USB menu must
be set to [Printer] before you connect the camera to the
printer. (See p.83)
2. The [Images] menu will appear.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
When [One Pic] is selected : The PictBridge function will
be applied only to the picture currently displayed.
When [All Pics] is selected : The PictBridge function will be applied to all pictures,
excluding TIFF, movie clips and voice files.
[ When [One Pic] is selected ] [ When [All Pics] is selected ]
- Press the Up/Down button to select the number of prints.
- Use the Left/Right button to select another picture and select the number of prints for
another picture.
- After setting the number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting the number of prints.
0
Exit:Shutter Set:OK
Setting the Number of Copies to Print
- Select [One Pic] or [All Pics]. A screen where you can set the number of copies to print will
appear as shown below.
PREV NEXT
0
Exit:Shutter Set:OK
Move :
One Pic
All Pics
Images