Filter
Top Products
118
FAQ
When you can not playback the recorded movie clip on your computer.
Ä
When you can not playback the recorded movie clip on your
computer, it is mostly caused by the video codec installed on the
computer.
[How to playback the H.264(MPEG4.AVC) movie clips]
• Using the QuickTime Player 7.6
Install the “QuickTime Player 7.6” provided in the CD.
(The QuickTime Player 7.6 supports the H.264(MPEG4.AVC)
compression for videos.)
ĺ Plays back using the “QuickTime Player 7.6”.
• How to use with installing United Codec
We recommend that install the latest United Codec. (Recom-
mendable Codec : K-Lite Codec Pack Full latest version)
ĺ Plays back using the “video player.”
(When installed K-lite codec with its full version, the Media
Player Classic or Windows Media Player 11 is recommended)
Ä
“QuickTime Player 7.6”, “K-lite United Codec full version” should
be installed in Windows ServicePack2 or later.
Ä
Although the computer is guaranteed as operated, the playback
might be intermittent depending on an user’s computer.
When the DirectX 9.0c or later is not installed
Install the DirectX 9.0c or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select the [CD-ROM drive:\
DirectX] folder and click the DXSETUP.exe file.
The DirectX will be installed. Visit the following site for
downloading the DirectX.http://www.microsoft.com/directx
If a PC connected with the camera stops responding while
Windows is starting.
In this case, disconnect the PC and the camera and Windows
will start. If the problem happens continuously, set the Legacy
USB Support to disable and re-start the PC. The Legacy USB
Support is in the BIOS setup menu. (The BIOS setup menu
differs from the PC manufacturers and some BIOS menus don’
t have Legacy USB Support) If you can’t change the menu by
yourself, contact to the PC manufacturer or BIOS manufacturer.