Filter
Top Products
056
Image Stabilization
This feature allows you to minimize camera
shake while taking a picture.
[OIS] ( ) : Performs optical image
stabilization.
[DUAL IS] (
) : Performs optical image
stabilization and digital
image stabilization simultaneously.
[DIS] (
) : Performs digital image stabilization.
Ŷ Things to watch out for using the DUAL IS/DIS mode
– The digital zoom will not operate in the DUAL IS/DIS mode.
– If the lighting conditions are brighter than À uorescent lighting condi-
tions, the DUAL IS/DIS will not activate.
– If the lighting conditions are darker than in À uorescent lighting condi-
tions, camera shake warning indicator ( ) will be displayed. For best
results only take pictures in situations where the camera shake warn-
ing indicator (
) is not displayed.
– If the subject is moving, the captured image may be blurred.
– As the DUAL IS/DIS uses the camera’s digital signal processor, it may
take a little longer for the camera to process and save the images.
OIS function may not work suf¿ ciently in the following cases.
- To take pictures of a moving subject.
- To take pictures with higher zoom values.
- When camera shake is beyond the camera-shake correction
range.
- When the shutter speed is slow
.
- When the battery is low.
If you operate OIS function using a tripod, the image can be
blurred by the vibration of the sensor of the OIS. Turn off the OIS
function when you use a tripod.
If the camera is subjected to an impact, the LCD monitor can be
affected. To make the camera function properly again, turn it on
and off.
Functions ( )
Image Stabiliser
Back Move