Filter
Top Products
11 7
Wireless network
You can send photos or videos that you captured with the camera to a
PC wirelessly. The Auto Backup feature works only with the Windows
OS.
Installing the program for Auto Backup
on your PC
1
Install Intelli-studio on the PC. (p. 142)
2
Connect the camera to the PC with the USB cable.
3
Click OK on the pop-up window.
•
The Auto Backup program is installed on the PC. Follow the
on-screen instructions to complete the installation.
4
Remove the USB cable.
5
Connect the camera to the PC again with the USB cable.
•
The camera stores information about the PC, so that the camera
can send files to the PC.
Before installing program, ensure that the PC is connected to a network.
If no internet connection is available, you must install the program from the
provided CD.
Sending photos or videos to a PC
1
Rotate the mode dial to B.
2
Select .
•
You must configure the backup PC information to use the Auto
Backup feature. For more details, refer to “Installing the program
for Auto Backup on your PC”. (p. 117)
3
Press [m] to set options.
•
To turn off your PC automatically after the transfer is complete,
select
→
Shut down PC after backup
→
On.
•
To view the help for the Auto Backup function, select
→
Guide.
4
Press [o] to start the backup.
•
To cancel sending, press [o].
•
You cannot select individual files to backup. This function backs
up only new files on the camera.
•
The backup's progress will be shown on the PC monitor.
•
When the transfer is completed, the camera will turn off
automatically in approximately 30 seconds. Select Cancel to
return to the previous screen and prevent the camera from
turning off automatically.
Using Auto Backup to send photos or videos