Filter
Top Products
4
Health and safety information
Do not touch the flash while it fires.
The flash is very hot when fired and may burn your skin.
Do not use a damaged power supply cord, plug, or loose
outlet when you charge batteries.
This may cause a fire or electric shock.
Do not force the camera’s parts or apply pressure to the
camera.
This may cause your camera to malfunction.
Exercise caution when you connect cables and install
batteries and memory cards.
If you force the connectors, improperly connect cables, or improperly
install batteries and memory cards, you can damage ports, connectors,
and accessories.
Keep cards with magnetic strips away from the camera
case.
Information stored on the card may be damaged or erased.
Never use a damaged battery, or memory card.
This may result in electric shock or camera malfunction or cause a fire.
Check that the camera is operating properly before use.
The manufacturer takes no responsibility for any loss of files or damage
that may result from camera malfunction or improper use.
You must plug the small end of the USB cable into your
camera.
If the cable is reversed, it may damage your files. The manufacturer is
not responsible for any loss of data.
Protect your camera’s lens.
Do not expose the lens to direct sunlight, as this may discolor the image
sensor or cause it to malfunction.
If the camera overheats, remove the battery and allow it to
cool down.
•
Prolonged usage of the camera may overheat the battery and raise
the internal temperature of the camera. If the camera stops operating,
remove the battery and allow it to cool down.
•
High internal temperatures may result in noise in your photos. This is
normal and does not affect your camera’s overall performance.