Filter
Top Products
172
Camera settings menu > Setting
* Default
Item Description
Format
Format the memory card. Formatting deletes all existing
les including protected les. (Ye s , No*)
Errors can occur if you use a memory card formatted by
another brand of camera, a memory card reader, or a
computer. Please format memory cards in the camera
before using them to capture photos.
Device
Information
View the rmware version of the body and the lens, Mac
address, and network certication number, or update the
rmware.
• Software Update: Update the rmware of the camera
body or lens. (Body Firmware, Lens Firmware)
•
You can update the rmware by connecting the camera
to the computer and starting i-Launcher. For more
details, refer to page 195.
•
You cannot run a rmware upgrade without a fully
charged battery. Recharge the battery fully before
running a rmware upgrade.
•
If you update the rmware, user settings and values will
be reset. (Date, time, language, and video out will not
change.)
•
Do not turn the camera o while the update is in
progress.
* Default
Item Description
Dual-band
Mobile AP
Set a frequency for using the camera as an AP for the
AutoShare, MobileLink, Remote Viewnder, or Baby Monitor
feature. (2.4 GHz*, 5 GHz)
If you use the camera in a country other than the one
where it was purchased, the 5 GHz Wi-Fi feature may not
function properly, due to dierences in radio frequencies.
In this case, use the 2.4 GHz Wi-Fi feature instead.
Sensor
Cleaning
• Sensor Cleaning: Remove dust from the sensor.
• Start-Up Action: When on, the camera performs sensor
cleaning each time you turn it on. (O*, On)
As this product uses interchangeable lenses, the sensor
can get dust on it when you change lenses. This can lead
to dust particles appearing in the photos you capture. It
is recommended not to change lenses when you are in a
particularly dusty area. Also, make sure to attach the lens
cap to the lens when not using it.
Reset
Reset the setup menu and shooting options to the factory
defaults. (Date, time, language, and video output settings
do not change.) (Ye s , No*)
Open Source
License
View open source licenses.