Filter
Top Products
My Camera > Accessories
54
Connecting the external ash
1
Remove the hot-shoe cover from the camera.
2
Mount the ash by sliding it into the hot-shoe.
•
To release the ash, gently pull the ash while you press the PUSH
button.
3
Press the power button on the ash.
•
You can capture a photo with a ash that is not fully charged, but it is
recommended to use a fully charged ash.
•
The available options may dier depending on the shooting mode.
•
There is an interval between two bursts of the ash. Do not move until the
ash res a second time.
•
For more details about optional ashes, refer to the user manual for the ash.
Use only Samsung-approved ashes. Using incompatible ashes may damage
your camera.