Samsung S500 Digital Camera User Manual


 
Messages
70
5. Enter a destination number on the Address
screen.
To clear or clear all your input, press or press
and hold the C key. When you have no input,
press and hold the C key to move to the
previous screen.
You can search for a number in Phonebook by
pressing the Phonebook soft key.
If you want to send the message to multiple
destinations up to 5, press the Add soft key and
repeat Step 5.
6. When you have finished entering the numbers,
press the Ok soft key.
The message is sent.
Note
: When the phone fails to send the message,
“Error” displays. Press the
Retry
soft key to try
again the transmission. You can save the
message or exit the menu by pressing the
No
soft
key.
Voice Mail
(Menu 1.4)
Storing the Voice Mail Server Number
Before using the voice mail service, you must store
the voice mail server number obtained from your
service provider.
To save the voice mail server number, select the
Voice mail menu option and Voice server
number (Menu 1.4.2). Enter the voice mail server
number and a name, if required, then press the Ok
soft key to save it.
Messages
71
Listening to Your Voice Mail
When you receive a voice mail, your phone displays
the voice mail indicator and you hear an alert,
depending on the message sound setting; for
further information, see page 80.
There are three ways to access your voice mail box:
In Idle Mode, when you receive a new voice mail,
press the Connect soft key to access your voice
mail server and follow the instructions provided.
In Idle Mode, hold the 1 key down to access your
voice mail server and follow the instructions
provided.
•Call your voice mail server number by accessing
the Connect to voice mail menu (Menu 1.4.1)
and follow the instructions provided.
Preset Messages
(Menu 1.5)
Using this menu, you can preset up to ten
messages that you use most frequently. When you
access this menu, the preset message list displays.
1. Scroll to a message or an empty entry by
pressing the Up or Down key.
2. Press the Select soft key and enter a new
message or change the old message.
For further details about entering characters,
see page 36.
3. Press the Ok soft key to save the message.