Filter
Top Products
Organiser
100
Note
: When the Quiet mode is activated, the alarm
tone doesn’t sound. But When you set a Morning call,
it sounds the alarm tone even if the Quiet mode is
activated.
To set the alarm to ring even if your phone is
switched off:
1. Scroll to Auto power on the Alarm list and
press the Select soft key.
2. If necessary, press the Up or Down key to select
On.
To turn the Auto Power feature off, select Off.
3. Press the Select soft key to save the setting.
4. When you have finished, press the soft key or
the key to exit.
Once you have activated the auto power alarm, a
check mark appears ahead of Auto power. If the
phone is switched off at the specified alarm time, it
automatically switches on and rings the alarm. It
then automatically switches off again.
Calculator
(Menu 5.6)
You can use the phone as a calculator. The
calculator performs basic arithmetic functions, such
as addition, subtraction, multiplication, division and
percentages.
To perform a calculation:
1. Enter the first number using the number keys.
Note
: To erase any mistakes or clear the display,
press the
C
key.
Organiser
101
2. Press the key to enter a decimal point (.) or
the key to enter the appropriate arithmetic
symbol: + (add), - (subtract), * (multiply), /
(divide), % (remainder), ( or ).
3. Enter the second figure.
4. Repeat Steps 2 and 3, if necessary.
5. Press the Equal soft key to view the result.
The result appears in the Answer box.
Note
: The result is rounded to six decimal places.
6. When you have finished, press the soft key or
the key to exit.
Conversion
(Menu 5.7)
This menu option allows you to convert from one
type of unit to another.
To convert a value:
1. Scroll to the type of conversion to be performed
from Currency, Length, Weight, Volume,
Area and Temperature, and press the Select
soft key.
2. Enter the value to be converted and press the
Down key to move to the From field.
You can enter a decimal point (.) using the
key.
3. Select the original unit by pressing the Left or
Right key and press the Down key to move to
the To field.