Filter
Top Products
16
Connecting to a Power Source
If the charging LED of the SAC-41 does not turn
on or blink after inserting the rechargeable battery,
please check whether the batteries are inserted
correctly.
Please check the battey charging status with
the charging LED of SAC-41.
Important information about battery (SLB-1137) charging
Charging LED
If there is a charging error, please check all the power connections are in place.
A USB cable for transmitting data can t be used for charging the rechargeable battery.
Charging time (When the camera is turned off)
- Using the cradle : About 150MIN
- Using the SAC-41 : About 150MIN
If the camera power is turned on and the [Off] sub menu of
the [Power Off] menu is selected, the charging time
extends to about 6 hours. When you charge the battery,
set the [Power off] menu to on.
If you use the cradle for transferring data, the automatic
power off function will not operate and the charging time
extends to about 6 hours.
Status Using the cradle Direct to the camera
Being Charged Red LED is on Red LED is on
Charging is complete Green LED is on Green LED is on
Charging error Red LED is off or blinking Red LED is off or blinking
Charging
LED
Back: Set : OK
File
Off
Power Off 1 min
Language 3 min
NOR
Setup