Filter
Top Products
89
Function lamp
Setting the function lamp
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [Lamp] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [Off] is selected : The function lamp will not light up.
If [On] is selected : The function lamp will light up.
Function Description
The lamp blinks and turns off when the camera is ready
to take a picture
The lamp blinks while saving the image data and turns
off when the camera is ready to take a picture
While movie recording The lamp blinks at a 2-second interval
While voice recording The lamp blinks at a 2-second interval
When the USB cable is inserted The lamp lights up
Transmitting Data The lamp blinks
While the self timer is
functioning
After taking a picture
Power on
The lamp will function while using the self-timer even if
the configuration is set to off the lamp.
(Based on 10-second Self-timer; see p. 35)
Back: Set : OK
Sound
USB Off
Lamp On
NOR
Setup
You can turn on and off the function lamp located on the front of the camera.
Description of the Function lamp