Filter
Top Products
SPEED DOME CAMERA User Guide
41
3. Secure the safety wire (attached to the product) to the housing as shown. (For details
about the cable connection, refer to the "Camera Wiring Interface Board" section in
this manual.)
4. Arrange the cables inside the housing lest they be damaged or stuck in, and use the
L-shaped wrench to tighten 4 screws to the housing. To ensure waterproofness, this
step needs your special care. Otherwise, the gasket on the outer side of the product
may be loose or just stuck in.
SAFETY WIRE
GASKET
HOUSING
MAIN-FRAME
SCREW
SAFETY WIRE