Filter
Top Products
SPEED DOME CAMERA User Guide
85
30. Initialization Menu
Ķ
Main Menu/Initialize
Power On Reset
:
Restarts the camera.
Factory Default Set
:
Enables resetting the camera to its factory default settings.
When the mode is selected, all custom data such as preset
locations is deleted from the camera.
Use this function if it is necessary to reset the settings of the
camera.
Camera Default Set
:
Resets the camera zoom module to the Factory Default
mode; use if you want to reset all camera settings including
Exposure and Backlight.
Auto Refresh
:
Enables optimizing the status of the camera’s built-in
electric circuits and components on a regular basis. (A
regular operation can be scheduled.)
This mode can be used to maintain and repair the current
settings of the camera when anomalous operations occur:
e.g. The camera happened to directly face a light source, or
the settings have been canceled after the camera repeatedly
rotated in all four directions for a long time to monitor a
specific location.
The default setting is Off.
- OFF, 1~7 Days : Selecting Off disables Auto Refresh and
selecting 1~7 Days automatically executes it after 1~7
days has passed.
✽ Auto Refresh takes approximately 10 seconds to finish. If
Auto Refresh activates in the middle of a sequence action, the
camera pauses the sequence action and performs an Auto
Refresh, then resumes the sequence action once the refresh
is complete.
ª
Initialize
Initialize
Power On Reset
Factory Default Set
Camera Default Set
Auto Refresh OFF
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status