Filter
Top Products
36_ PTZ camera control
PTZ CAMERA CONTROL
MODE
You have to check that proper PTZ camera
settings are allocated for PTZ device setup in the
Camera menu.
In case of SHR-5082, only 8 channels are
displayed.
W
hen the PTZ configuration is complete, the PTZ
sign (
PTZ
) appears on the live screen.
If you press the ENTER button in the split
screen, a blue bar appears for selection
handling. Use the Direction buttons to move
this bar until you reach the channel having the
PTZ sign, and press the PTZ button on the
front panel or remote control to enter the PTZ
Camera Control Mode. In PTZ Camera Control
Mode, the color of the PTZ sign changes to
yellow from white. In this mode, you can pan
and tilt the camera, and zoom in the screen.
Another PTZ camera control is executed in
a single screen. Press the channel number
button on the front panel or remote control
to select the PTZ-enabled channel and press
the PTZ button. In Single Screen PTZ Camera
Control Mode, the PTZ sign changes to yellow
from white. You can pan and tilt the camera,
and zoom in the screen. It also supports the
miscellaneous functions like Preset, Camera
Menu, and etc.
Press the PTZ button in the live mode to
cancel the PTZ camera control function.
After cancellation, the PTZ sign on the Auto
Sequences to white from yellow.
You cannot use the PTZ device and
remote control device at the same time
due to communication problems.
In PTZ control mode, the PTZ mode
of DVR is canceled when the remote
control is connected. When the remote
control is disconnected, it changes to
PTZ mode. Refer to the user manual for
the remote control to control the PTZ
device using the remote control.
When using the remote control that is
run by Samsung protocol, the direct
camera control is enabled.
If there is no PTZ control activity within
maximum 5 minutes, the PTZ mode
is automatically cancelled. Then it is
controlled by the Smart Viewer.
BASIC PTZ OPERATIONS
When using a remote control, it is possible to
control the camera with the remote control
run by Samsung protocol. If there is no PTZ
control for 5 minutes from the DVR, this mode is
automatically cancelled. Then it is controlled by
the Smart Viewer.
PTZ camera control
PTZ
TELE
WIDE
VIEW
PRESET
PTZ
TELE
WIDE
VIEW
PRESET
CancelOK
PTZ Device
9-16
Half Duplex
Serial Mode:
Cam ID Protocol Baudrate Parity Data Stop
1 000 Samsung 38400 None 8 1
2 001 Vic 38400 None 8 1
3 002 Pan. 19200 None 8 1
4 003 AD 38400 Even 8 1
5 004 Phi. 38400 None 8 1
6 005 Ern. 38400 None 8 1
7 006 Pel-D 19200 None 8 1
8 007 Pel-P 19200 None 8 1
2007 03 11 09:27:16
CAM 01
SHR-5162_Eng.indb 36 2007-06-18 ｿﾀﾀ・11:48:44