Filter
Top Products
COLOR DOME CAMERACOLOR DOME CAMERA User’s ManualUser’s Manual
2322
3. Please press the LEFT or RIGHT button if you wish to change mode.
• When the LEFT or RIGHT button is pressed, available values and modes are
displayed in order. Please keep pressing the button until you get to the mode
you wish to operate.
4. Please select 'EXIT' and then press the SETUP button to finish the setting.
Select any function you
wish to operate by
using the UP and
DOWN buttons.
Modes can be changed
using the LEFT and
RIGHT buttons.
• If appears at the mode you wish to operate, it means that there is a sub-
menu which can be selected by pressing the SETUP button.
• If---appears at the mode item, it means that there is no mode available to be
selected.
Notes
LENS(Adjusting to the brightness level)
This function is used to adjust the brightness of the screen.
1. When the SETUP menu is displayed on the screen, please position the arrow
to point to 'LENS' by using the UP and DOWN buttons.
3. Please press the SETUP button if you wish to return to the previous menu.
• The brightness of the screen can be adjusted within the
range of 1~70. The optimum level of brightness for the
user can be achieved by adjustment.
Notes
3. Please press the SETUP button when all the settings are complete.
SHUTTER (condition and speed control)
Because of using the DC lens, the shutter speed is fixed at 1/60.
1. When the SETUP menu is on the screen, please position the arrow to point
to 'SHUTTER' by using the DOWN button.
2. Please select the shutter mode by pressing the LEFT or RIGHT button.
FLK: Please select 'FLK' mode when flickering occurs on the screen, due to an
imbalance between illumination and frequency. NTSC Model:1/100, PAL
MODEL: 1/120
2. Using the SETUP button, you can control the brightness of the screen.
Camera Operation