Filter
Top Products
Warning
The camera needs periodic inspection.
Contact an authorized technician for inspection.
Stop using your camera when you find a malfunction.
If you use your camera around smoke or unusual heat for a long time, a fire
may be caused.
Do not Install the camera on a surface that can not support it.
Unless the surface is suitable, it could cause falling or other hazards.
Do not handle the camera with wet hands
It could cause an electric shock.
Do not disassemble the camera.
It may result in fire, electric shock or other hazards.
Do not use the camera close to a gas or oil leak.
It may result in fire or other hazards.
Features
Built-in Auto Iris Vari-Focal Lens.
The focal length of lens is 3 to 9 mm(F 1.2),
Equivalent to 3X zoom. The built-in lens allow
the camera to have wider dynamic range,
therefore you can use in various applications.
Horizontal Resolution 530 TV Lines
Clear image quality has been achieved by
employing a CCD with 410,000 pixel(NTSC),
470,000 pixel(PAL), which provides a
horizontal resolution of 530 TV lines.
Electronic DAY & NIGHT
This camera has a function that electronically
selects the mode that is appropriate for daytime
or night-time conditions. The COLOR mode
operates in daytime conditions to provide
optimum colors, and BW mode operates in
night-time conditions to enhance the definition
of the image.
PRIVACY Function
The PRIVACY function conceals the areas
you do not wish to appear on the screen.
IP66 Approved/ Dust and Rain
Resistant
With dust and rain resistant design, the
camera can be installed outside under building
eaves or places thatare exposed to the dust
and rain.
High Sensitivity
The built-in high sensitivity COLOR CCD enables
a clear image even in 0.002Lux (Sens-Up)
illumination.
SSNR (Samsung Super Noise
Reduction)
By using built-in SSNR function manufactured
by SAMSUNG TECHWIN, the amount of low
illuminance noise has been significantly
reduced, and the signal-to-noise ratio (S/N)
as well as horizontal resolution have been
improved, resulting in a clear and sharp
image display even in the dark.
Controlled by OSD Menu
The camera can be controlled by selecting
text displayed on the monitor screen.
Sub Monitor Function
The sub monitor function enables easy
adjustment of the camera angle within the
monitoring range during its installation.
Additional Functions
SENS-UP, MOTION DETECTION, MIRROR,
SHARPNESS and SYNC(INT/LL) functions
are also available.
COLOR DOME CAMERA User’s Manual
7
COLOR DOME CAMERA User’s Manual
6