Filter
Top Products
COLOR DOME CAMERA User’s Manual
17
COLOR DOME CAMERA
User’s Manual
16
Installation
•When adjusting the rotating angle, loosen rotate base holding screw as following Figure
A. And then tighten it again.
•When adjusting the tilting angle, just grip the tilt base and adjust tilting angle.
•When adjusting the panning angle, loosen pan base holding screws as the following
Figure B. And then tighten them again.
•In case of adjusting the tilting, do not take the lens for preventing physical shocks.
Please take the Tilt Base.
Notes
<Figure A>
<Figure B>
1) Unlock the zoom (or the focus) handle to release it
2) Adjust the zoom (or the focus) handle by moving it to WIDE (NEAR) or TELE
(FAR) position.
3) After adjustment, tighten the zoom (or the focus) handle, taking care that
the adjusted position does not change.
Adjusting varifocal lens zoom and focus
Focus handle
Zoom handle