Filter
Top Products
COLOR DOME CAMERA User’s Manual
33
COLOR DOME CAMERA User’s Manual
32
•If AGC is OFF, you can’t select AUTO mode.
•When an infrared light is used, there may be a problem with focusing and COLOR
(DAY & NIGHT).
Notes
SYNC : Two SYNCHRONIZATION modes are available INTERNAL and EXTERNAL
LINE-LOCK. In LINE-LOCK mode, it synchronizes the video signal between
cameras without a synchronous generator. The line-lock synchronization is only
used in the areas of 60Hz (NTSC Models) / 50Hz (PAL
Models).
- INT : Internal synchronization
- LL : External line-lock synchronization
• If you choose ‘LL’, you can adjust the desired phase. Press
the SET button.
• You can adjust the desired phase from 0 to 359.
• When the power frequency is 50Hz, you can not use line-lock mode (NTSC Models).
• When the power frequency is 60Hz, you can not use the line-lock mode (PAL Models).
• ‘Sync.’ mode is fixed to ‘INT’ in DC 12V input power.
Notes
PRIVACY: This modes conceals the areas you do not wish to appear on the screen.
- OFF : Cancels the PRIVACY mode.
- ON : Operates the PRIVACY mode.
•Please press the SETUP button.
• Please select the area you wish to observe from the 4 areas in AREA SEL mode.
• Please select ON mode for the chosen area.
• Please adjust the size of the area to be observed by using the UP, DOWN, LEFT
or RIGHT button.
MOTION DETECTION:
This product has a feature that allows you to observe movements of objects in 4
different areas on the screen, and the words 'MOTION DETECTED' appear on the
screen when movement is detected; hence a single individual can conduct
supervision efficiently. The camera detects an object's movement by sensing
disparity of outline, and level of brightness and color.
• Please press the SETUP button.
- OFF : MOTION DETECTION mode is cancelled.
- ON : Any motion in the selected areas is observed.
•Please press the SETUP button to save the changes and complete the setting.
•There is no ‘MD’ output signal. ‘MD’ is on screen display only words.
Notes
•Please select the area you do not wish to appear from the 4 areas in AREA SEL mode.
•Please select ON mode for the chosen area.
•Please adjust the size of the area to be concealed by using the UP, DOWN, LEFT or
RIGHT button.
Camera Operation