Filter
Top Products
COLOR IR CAMERA User’s Manual
25
COLOR IR CAMERA User’s Manual
24
1. Please press the SETUP button.
• Settings can now be made. The SETUP menu is displayed on the monitor.
2. Please select any function you wish to activate by using the UP and DOWN
buttons.
• The arrow can be moved up or down by using the UP and DOWN buttons.
Please position the arrow to point to the function you wish to operate.
Operating Your Camera
3. Please press the LEFT or RIGHT button if you wish to change mode.
• When the LEFT or RIGHT button is pressed, available values and modes
are displayed in order. Please keep pressing the button until you get to the
mode you wish to operate.
4. Please select 'EXIT' and then press the SETUP button to finish the setting.
• If appears at the mode you wish to operate, it means that there is a sub-
menu which can be selected by pressing the SETUP button.
• If
appears at the mode item, it means that there is no mode available to
be selected.
Notes
SETUP
1.LENS DC
2.SHUTTER ---
3.WHITE BAL. ATW
4.BACKLIGHT OFF
5.AGC NORMAL
6.SSNR LOW
7.SENS-UP OFF
8.SPECIAL
9.EXIT
SETUP
1.
LENS DC
2.SHUTTER ---
3.WHITE BAL. ATW
4.BACKLIGHT OFF
5.AGC NORMAL
6.SSNR LOW
7.SENS-UP OFF
8.SPECIAL
9.EXIT
Select any function you
wish to operate by
using the UP and
DOWN buttons.
Modes can be
changed using the
LEFT and RIGHT
buttons.
SETUP
1.LENS DC
2.SHUTTER ---
3.WHITE BAL. ATW
4.BACKLIGHT OFF
5.AGC NORMAL
6.SSNR LOW
7.SENS-UP OFF
8.SPECIAL
9.EXIT
LENS (Adjusting to the brightness level)
This function is used to adjust the brightness of the screen.
1. When the SETUP menu is displayed on the screen, please position the arrow
to point to 'LENS' by using the UP and DOWN buttons.
2. Using the SETUP button, you can control the brightness of the screen.
3. Please press the SETUP button if you wish to
return to the previous menu.