Filter
Top Products
Installation
COLOR IR CAMERA User’s Manual
17
COLOR IR CAMERA User’s Manual
16
•When adjusting the rotating angle, loosen rotate base holding screw as following
Figure A. And then tighten it again.
•When adjusting the tilting angle, just grip the tilt base and adjust tilting angle.
•When adjusting the panning angle, loosen pan base holding screws as the
following Figure B. And then tighten them again.
•In case of adjusting the tilting, do not take the lens for preventing physical shocks.
Please take the Tilt Base
Notes
Rotate Base Holding Screw
Pan Base Holding Screw (Color:Gold) Rotate Base Holding Screw
1) Unlock the zoom(or the focus) handle to release it
2) Adjust the zoom(or the focus) handle by moving it to WIDE(NEAR) or TELE
(FAR) position.
3) After adjustment, tighten the zoom(or the focus) handle, taking care that
the adjusted position does not change.
Adjusting varifocal lens zoom and focus
Zoom Handle
Focus Handle